Honda Civic Owners Manual: RDM Conditions and Limitations
The system may not properly detect lane markings and the position of your
vehicle
►nder certain conditions. Some examples of these conditions are listed below.
Environmental conditions
- Driving in bad weather (rain, fog, snow, etc.).
- Sudden changes between light and dark, such as an entrance or exit
of a tunnel.
- There is little contrast between lane lines and the roadway
surface.
- Driving into low sunlight (e.g., at dawn or dusk).
- Strong light is reflected onto the roadway.
- Driving in the shadows of trees, buildings, etc.
- Shadows of adjacent objects are parallel to lane markings.
- Roadway objects or structures are misinterpreted as lane markers.
- Reflections on the interior of the front windshield.
Roadway conditions
- Driving on a snowy or wet roadway (obscured lane marking, vehicle
tracks,
reflected lights, road spray, high contrast).
- Driving on a road with temporary lane markings.
- Faint, multiple, or varied lane markings are visible on the
roadway due to road
repairs or old lane markings.
- The roadway has merging, split, or crossing lines (e.g., such as
at an intersection
or crosswalk).
- The lane markings are extremely narrow, wide, or changing.
- The vehicle in front of you is driving near the lane lines.
- The road is hilly or the vehicle is approaching the crest of a
hill.
- Driving on rough or unpaved roads, or over bumpy surfaces.
- When objects on the road (curb, guard rail, pylons, etc.) are
recognized as white
lines (or yellow lines).
- Driving on roads with double lines.
Vehicle conditions
- Headlight lenses are dirty or the headlights are not properly
adjusted.
- The outside of the windshield is streaked or blocked by dirt, mud,
leaves, wet
snow, etc.
- The inside of the windshield is fogged.
- The camera temperature gets too high.
- An abnormal tire or wheel condition (wrong sized, varied size or
construction,
improperly inflated, compact spare tire, etc.).
- The vehicle is tilted due to a heavy load or suspension
modifications.
- When tire chains are installed.
Press the RDM button to turn the system on
and off.
The indicator in the button comes on and
the message appears on the driver
information interface when the system is
on.
...
Provides steering input to help keep the vehicle in the middle of a detected
lane and
provides tactile and visual alerts if the vehicle is detected drifting out of
its lane.
Lane ...
See also:
Honda Civic Owners Manual. Rear Seat Heaters
The power mode must be in ON to use the
seat heaters.
There is no heater in the rear center seating
position.
The indicator for your setting comes on while
the seat heater is in use. Press the button on
the opposite side to turn the heater off. The
indicator goes off.
While in HI, ...