Honda Civic Service Manual: Keyless Buzzer Removal and Installation (With Keyless Access System)
|
|
|
1.
|
Remove the screws (A), the bolts (B), and the clips (C, D) securing
the rear bumper (E).
|
|
|
|
|
2.
|
Pull out the rear bumper (A) from the side spacer (B). Repeat
this step on the opposite side.
|
|
|
|
|
3.
|
With the help of an assistant, pull out the rear bumper (A) from
the side bracket (B). Repeat this step on the opposite side.
|
|
|
|
|
4.
|
With the help of an assistant, remove the rear bumper (A).
|
|
|
|
|
1.
|
Disconnect the connector.
|
|
2.
|
Remove the keyless buzzer (A).
|
|
|
|
|
1.
|
Install the keyless buzzer (A).
|
|
2.
|
Connect the connector.
|
|
|
|
|
1.
|
With the help of an assistant, install the rear bumper (A).
|
|
|
|
|
2.
|
With the help of an assistant, install the rear bumper (A) to
the side bracket (B). Repeat this step on the opposite side.
|
|
|
|
|
3.
|
Install the rear bumper (A) to the side spacer (B). Repeat this
step on the opposite side.
|
|
|
|
|
4.
|
Install the screws (A), the bolts (B), and the clips (C, D) securing
the rear bumper (E).
|
|
1.
Rear Interior LF Antenna
1.
Open the trunk lid.
2. ...
7471A0
SRS components are located in this area. Review the SRS component locations
and the precautions and procedures before doing repairs or service.
1.
Bat ...
See also:
Honda Civic Owners Manual. Emissions Testing
Testing of Readiness Codes
Your vehicle has readiness codes as part of the onboard self diagnostic
system.
Some States use these codes for testing to verify whether your vehicle's
emissions
components are working properly.
The codes may not be read properly if testing is performed just a ...
Keyless Access LF Antenna (Rear Interior) Removal and Installation
Under-Dash Fuse/Relay Box Removal and Installation (KA KX models without Keyless
Access System)