Honda Civic manuals

Honda Civic Service Manual: Front Door Opening Seal Removal and Installation

Honda Civic Service Manual / Body / Doors and Enclosures / Door Assembly / Front Door Opening Seal Removal and Installation

8351C0 DRIVER SIDE

8361B7 PASSENGER SIDE

Removal

1. Front Door Sill Trim - 4-Door

1.

Remove the cap (A) from the front door sill trim (B).

2.

Remove the opener lock cylinder (C).

3.

Remove the screw (A).

4.

Remove the front door sill trim (A).
2. Front Seat Belt Lower Anchor Bolt - 2-Door

1.

Remove the lower anchor cap (A).

2.

Remove the lower anchor bolt (B).
3. Front Door Sill Trim - 2-Door

1.

Remove the cap (A).

2.

Remove the opener lock cylinder (B).

3.

Remove the screw (A).

4.

Remove the front door sill trim (A).
4. Kick Panel

1.

Pull out the front door opening seal (A) as needed.

2.

Remove the kick panel (B).
5. Front Door Opening Seal

1.

Remove the front door opening seal (A).

Installation

1. Front Door Opening Seal

1.

Install the front door opening seal (A).
2. Kick Panel

1.

Install the kick panel (A).

2.

Install the front door opening seal (B).
3. Front Door Sill Trim - 2-Door

1.

Install the front door sill trim (A).

2.

Install the screw (A).

3.

Install the opener lock cylinder (A).

4.

Install the cap (B).
4. Front Seat Belt Lower Anchor Bolt - 2-Door

@@@

1.

Assemble the washer, the collar, and the bushing on the lower anchor bolt as shown.

NOTE: Apply medium strength liquid thread lock to the lower anchor bolt before reinstallation.

7/1s-2om-min

2.

Install the lower anchor bolt (A).

3.

Install the lower anchor cap (B).
5. Front Door Sill Trim - 4-Door

1.

Install the front door sill trim (A).

2.

Install the screw (A).

3.

Install the opener lock cylinder (A).

4.

Install the cap (B) to the front door sill trim (C).
Door Assembly
...

Door Striker Adjustment
Adjustment 1. Door Striker - Adjustment mmmmmm Make sure the door latches securely without slam ...

See also:

Honda Civic Owners Manual. Getting Ready to Replace the Flat Tire
Open the trunk floor lid. Take the tool case out of the trunk. Take the jack and wheel nut wrench out of the tool case.  Unscrew the wing bolt, and remove the spacer cone. Then, remove the spare tire. Place a wheel block or rock in front and rear of the whee ...

© 2016-2025 Copyright www.hocivic.com

0.0155